Defeating COVID-19 with air disinfection

Inline Filter
READ MORE ..
Surface Disinfectant

Embryo Safe is effective against spores, Fungi, Bacteria including Mycobacterium and viruses including HSV-HF, HIV-1 and SARS.

Microbiological effect is enabled in 30 seconds (50 ppm).

Formulation: Hypochlorous ( HOCI )
pH: 4 – 6

AREAS OF USAGE

Embryo Safe Surface Disinfectant can be used in IVF and Andrology laboratories, in operating rooms and for disinfection of floor and surfaces. Disinfection is achieved in 30 secs and mechanical sterilization is achieved in 5 mins.

USAGE

Embryo Safe is poured in a container as needed. Application surface is wiped with an Embryo Safe sprayed mop or cloth and wait for 30 seconds. After 30 seconds, disinfection is done. If mechanical sterilization is needed, it should be waited for 5 minutes and then the surface is wiped with an Embryo Safe sprayed mop or cloth.

WARNING

Ready-to-use Embryo Safe solution should not be diluted. It should not be mixed up with any chemical. It should not be drunk. It should not be exposed to direct sunlight and high temperature. It should be preserved at ambient temperature.

Environmental Effects

Active ingredients of Embryo Safe are not hazardous to nature and they can be dissolved naturally.

Test Organism and Effect Time

Staphylococcus aureus, Escherichia coli, Enterococustaecalis, Psendominas aeruginosa MRSA SNUH 7135, HRSA SNUH 7191, MS-SA, MS-CNS, Acinetobacter Baumannii, Serratia marcescens, Proteus mircescens, Salmonella sp. Group A, Salmonella sp. Group B, Shigella S Bacillus cereus exneri, Shigella boydii, Shigella sonnei, Bacillus alvei, Bacillus circulans, Candida albicans, Candida tropicalis, Mycobacterium tuberculosis, Mycobacterium chelonae Helicobacter pylori, Hepa virus B, inf. virus APR 8, HSV-HF, HIV-I, SARS

Disinfectant Spray
  • Odorless
  • Transparent
  • Alcohol free
  • No VOC release
  • Does not contain aldehyde
  • Does not contain phenol
  • Does not contain ammonium components
  • MEA Tested
  • Ready to use solution
  • Non allergic
  • Non toxic
  • Non corrosive
  • Bactericidal
  • Virucidal
  • Fungicidal
  • Sporicidal
  • Neither medical nor chemical waste
  • Fast acting
  • Ecologic

AREAS OF USAGE

Embryo SAFE is a fast-acting spray and wipe disinfectant. It could be used in the IVF and Andrology laboratories, in the operating rooms, to incubator, laminar flow hoods, micromanipulators, aspiration pumps, ultrasounds, etc. It could be safely applied to glass, ceramic, silicon, plastic, wood, aluminum, stainless and for furniture & steel.

FEATURES

Embryo SAFE is a bactericidal, fungicidal, virucidal and Sporicidal. Hypochlorous acid is the active ingredient (HOCl). While fighting against microorganisms,the neutrophil cells in the human body produce highly effective antimicrobial hypochlorous acid. This material constitutes about 80% of the defense mechanism. It does not harm skin or human health. it is hypoallergenic and does not cause allergy. Completely environmentfriendly. It does not have carcinogenic effects unlike other disinfectants. It has a completely new and synergistic excipient performing cold application which eases disinfection. Embryo SAFE is a material preserver and not corrosive. It does not contain aldehyde, phenol, and alcohol and ammonium compounds. Embryo Safe renders quick and reliable ineffectiveness to M. tuberculosis, MRSA, Escherichia coli, Salmonella, hepatitis B, hepatitis C, HIV-1, many bacteria and viruses such as SARS and H5N1.

USAGE

Embryo SAFE is sprayed onto the entire area of the surface covering the entire surface and applied from 30 cm. distance. At least 30 seconds should pass to begin to show the microbiological efficacy. However, it is recommended to wait for 1 minute for the high-level disinfection. Then it is dried with a sterile cloth. This drying could also be done with Embryo SAFE sprayed sterile cloth. You do not need to rinse with water after the Embryo SAFE application. Embryo SAFE does not have any toxic effect and 100% secure.

Hand Disinfectant
  • Odorless
  • Transparent
  • Alcohol free
  • No VOC release
  • Does not contain aldehyde
  • Does not contain phenol
  • Does not contain ammonium components
  • MEA Tested
  • Ready to use solution
  • Non allergic
  • Non toxic
  • Non corrosive
  • Bactericidal
  • Virucidal
  • Fungicidal
  • Sporicidal
  • Neither medical nor chemical waste
  • Fast acting
  • Ecologic

USAGE

Sufficient amount of Embryo Safe is poured onto hand. Hands are scrubbed in a way that entire surface of the hands get wet. Then hands are dried after 30 seconds.

Inline Filter

The First and only in the World 0,10 micron unique performance HEPA Filter.

Contains Coconut active carbon and an internal HEPA filter that is three times bigger than other inline filters.

Coconut activated carbon is washed 6 times repeatedly with sterile water to offer greater VOC and particle absorption than standard inline filters.

Female-male link connections in order to prevent misuse.

No adhesive or chemical materials are used in the production process ensuring safety for medical use.

Eliminates more particles – the internal HEPA filter space has diameter of 0.1µm. 85% of particles in gas are less than 0.3µm in size.

Life Time: 6 Months

WHAT DOES EMBRYO SHIELD DO?

Embryo Shield is an inline filter which is installed on the CO2/N2 gas lines. It filters VOC and CAC existing in CO2/N2 gas. Thanks to the coconut active carbon in it.

WHY COCONUT ACTIVE CARBON?

Coconut active carbon enables 20 times more efficient VOC/CAC absorption than coal based active carbon. Filters containing coal based active carbon cannot provide sufficient absorption. Embryo Shield contains more amount of coconut active carbon. Thanks to its 26 cm body. It provides purification of CO2/N2.

WHY COCONUT CARBON IS WASHED 6 TIMES WITH STERILE ULTRA-PURE WATER?

Active carbons are exposed to undesirable gases during production. This situation decreases the amount of absorbent of active carbon. Active carbon producers do not have clean room areas. Active carbons are exposed to high amount of particles due to the conditions of the environment that they are being produced in. Other inline filters are not subjected to active carbon purification and washing process during production. Embryo Shield is washed 6 times with sterile ultra-pure waterto make it appropriate for medical use. It enables safer purification of CO2/N2 gases. It is the first and the only product with this feature in the World.

WHY SHOULD I USE 0.10 MICRON HEPA FILTER?

85% of the particles in environment are smaller than 0.30 microns. This has been proven with number of researches carried out by the entities of the universities that focus on air pollution. Particles accompany CO2/N2 while tubes are being filled. Since the other inline filters have 0.30-micron HEPA pinholes, 85% of the particles are excluded to reach to embryos which results it contamination. Thanks to its’ first and the only FDA approved 0.10-micron HEPA filter. It eliminates all of the particles and provides the sterilization of CO2/N2 gas.

Frequently Asked Questions

It is 100% safe for IVF.
HEPA is approved by FDA.
Embryo Shield can sterilize CO2/N2 gas.
Coconut based active carbon is washed 6 times with pure sterile water.
It has 26 cm body for long lasting usage.
It has female-male connector to prevent mistakes at set-up.
Silicone glue is never used in any part of production.